The Replacement Cup Holder for Thomas Payne Momentum Recliners # 195-387597 will work for the Momentum series recliners (#'s 195-000055, 195-000056, 195-000055-056, 195-055-056-058, and 195-055-056-057) if you have one of those models then this will work for you.
But it sounds like you have a double recliner with power recline which the # 195-387597 does not have. The Momentum series has release handles between the seat cushion and arm of the recliners to activate the footrests. The Replacement... view full answer...
The plastic trim cover for the Optronics Drop In Cup Holder with Handle Rest - 2 Tier - 2-1/2" Tall x 3-5/8" Diameter Item # 09017101B is not sold separately. You would have to replace the whole thing. view full answer...
We do have some replacement parts for power in regards to the Thomas Payne Momentum RV Dual Reclining Sofa that you referenced.
The parts that we have are # 195-387597 for the cup holder, # 195-387596 for the control box, and # 195-387595 for the power cord.
The cup holder is self-explanatory but if you are needing to replace one of the other 2 parts and are not sure which one it is, the control box can be located either behind or under your recliner. This is known as the "brains" of... view full answer...
You are correct that the Replacement Wheel Cup for Yakima HoldUp EVO Front Tray # 8880831 is for the rear wheel. The front reference is for the front tray as the parts are different between the front and rear trays on the Yakima Hold Up EVO bike racks.
Since you are looking for a front wheel holder you will need either the Replacement Spine and Front Wheel Tray for Yakima HoldUp EVO Bike Racks # Y32AR for the front bike tray or the Replacement Spine and Rear Wheel Tray for Yakima HoldUp... view full answer...
Yes, we carry the Replacement 12-Volt DC Power Cord for Voyager LCD Monitor # PXXWVOM541HAR, which is six feet in length and would plug in to the back of your Voyager WVOM541AP monitor. For the suction cup you can use the Replacement Suction Cup Mounting Bracket for Voyager Observation System # PVOS5SCM. view full answer...
The replacement Thomas Payne RV cupholder that has the most features is the # LC38FR which has light, open, close, massage, heat, and lock/unlock buttons. If you let me know which specific sofa you have I can see which replacement you'd need. view full answer...
Your best bet will be to get the Replacement Cup Holder for Thomas Payne Momentum Recliners # 195-387597, since the plastic cover is not available separately. This will be a direct replacement for the cupholder with the heat, massage and LED buttons.
Since the heat does not function, this is likely due to a bad controller. For a replacement controller you will need the Replacement Control Box # 195-387596, which will be a direct replacement for your momentum recliner. view full answer...
I have a solution for you. For your older-style HoldUp, Yakima only sells the complete tray (platform, arm, front wheel tray/cup, and ratcheting hook). For this part, you will need the Replacement Front Wheel Holder Assembly for Yakima HoldUp Bike Carriers # Y90197. To install the replacement assembly, you will use your current mounting hardware. Also, you will need to use your current cable lock to switch over to the new assembly. I went ahead and attached a photo to this answer that shows... view full answer...
That is correct you will just need to replace the damaged heating pads with the Replacement 12 Volt Seat Heating Pad # LC38UD since you have the manual reclining seats. According to Lippert's manual the removal process is the same for fabric and leather seating surfaces. view full answer...
You've got a couple options for your 2012 Rockwood Freedom 2280 pop up camper to carry your bikes.
One of your most straightforward solutions would be to add a roof rack to the top of the camper itself. Based on my research, it looks like you will likely have a beveled, fiberglass one piece top on your Rockwood Freedom, so you can use the Swagman Ladder Rack, part # S80510 as a permanent installation on the camper's roof.
This will create a 150 pound capacity square bar roof rack on... view full answer...
Go To Results